Sales & Support
Request A Quote - Email
Payment & Shipping Terms:
|Product Name:||MT-02P-K-20||Insulation Class:||B/F/H|
|Normal Voltage:||24-110-220-230VAC 12-24VDC||Connection Type:||DIN43650A|
|Normal Power:||AC 15VA DC 12W||Internal Diameter:||Φ13.5mm|
|IP:||65||Connection Type:||DIN43650A,Fly Leading Wire|
MT-02P-K-20 Cartridge valve Pressure distribution valve Hydraulic valve
The hydraulic valve is an automatic component operated by pressure oil. It is controlled by the pressure oil of the pressure regulating valve. It is usually used in combination with an electromagnetic pressure regulating valve. It can be used to remotely control the on/off of oil, gas and water pipeline systems of hydropower stations. Commonly used for clamping, control, lubrication and other oil circuits. There are direct-drive type and pilot-type type, and the pilot type is used.
A component used in hydraulic drives to control fluid pressure, flow, and direction. The pressure control valve is called the pressure control valve, the flow control valve is called the flow control valve, and the directional control valve is called to control the on, off and flow directions.
Hydraulic valve design principle
The design of the hydraulic valve is mainly for the design of the hydraulic valve group, and the hydraulic valve group must first consider the oil circuit before designing. It is necessary to determine which parts of the oil circuit can be integrated in advance, and the design of the oil circuit must be simple and simple. Go to unnecessary steps. After determining the oil passage, the main ones are the inclined holes and the process holes. These things on the oil road should be reduced. As long as it is enough, it is not necessary. In the design of the inclined holes and the process holes, pay attention to the aperture. In combination with the flow, the direction and position must be appropriate, and the overall situation should be considered to ensure that the requirements are met. If there is something wrong with the direction or position and you need to adjust the components, you must ensure that it can be easily and conveniently operated and maintained.
|Control element||Pressure Valve Pressure Oil|
1.Press control method: manual
2.High cycle life.
3.Compact structure, easy installation, commissioning, use and maintenance, good versatility.
4.Reliable quality and low failure rate.
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex, TNL will be normal ways, If you require use of a courier, we can do it.
4. Also we can send by your delivery acount if you want.
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.